• Вашата кошничка е празна!

  • Bambu Lab P2S - Technical Specifications
  • Printing Technology Fused Deposition Modeling
  • Build Volume (W*D*H) 256*256*256 mm³
  • Nozzle Hardened Steel
  • Max Nozzle Temperature 300 ℃
  • Included Nozzle Diameter 0.4 mm
  • Supported Nozzle Diameter 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
  • Filament Cutter Built-in
  • Extruder Motor Bambu Lab High-precision Permanent Magnet Synchronous Motor
  • Build Plate Material Flexible Steel Plate
  • Included Build Plate Type Textured PEI Plate
  • Max Heatbed Temperature 110 ℃
  • Max Speed of Toolhead 600 mm/s
  • Max Acceleration of Toolhead 20,000 mm/s²
  • Max Flow for Hotend 40 mm³/s
  • Filter Type Activated Carbon
  • Filament Supported PLA, PETG, ABS, ASA, TPU, Support for PLA, Support for PLA/PETG, Support for ABS, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF
  • Camera Built-in; 1920*1080; 30 fps HD
  • Filament Run Out Sensor Supported
  • Filament Tangle Sensor Supported
  • Power Loss Recovery Supported
  • Max Power* 1200 W@220 V
  • Working Temperature 10 °C–30 °C
  • Touchscreen 5-inch 854*480 Touchscreen
  • Storage Built-in 8 GB EMMC and USB Port
  • Control Interface Touchscreen, mobile App, PC App
  • Motion Controller Dual-core Cortex-M4 and Single-core Cortex-M7
  • Application Processor Quad-core 1.5 GHz ARM A7
  • Neural Processing Unit 2 TOPS
  • Software
  • Slicer Bambu Studio
  • Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.
  • Supported Operating System MacOS, Windows, Linux
  • Network Control
  • Ethernet Not Available
  • Wireless Network Dual-Band Wi-Fi
  • Network Kill Switch Not Available
  • Removable Network Module Not Available
  • 802.1X Network Access Control Not Available
  • Wi-Fi
  • Operating Frequency 2412 - 2472 MHz, 5150 - 5850 MHz (FCC/CE)
  • 2400 - 2483.5 MHz, 5150 - 5850 MHz (SRRC)
  • Wi-Fi Transmitter Power (EIRP) 2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC)
  • 5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC)
  • 5 GHz Band3: <30 dBm (CE); <24 dBm (FCC)
  • 5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE)
  • Wi-Fi Protocol IEEE 802.11 a/b/g/n

Напиши мислење

Ве молиме најавете се или регистрирајте се за да оставите мислење

3D Принтер Bambu Lab P2S 256x256x256

  • Код на продуктот: P2S
  • Достапност: На залиха

  • 0ден.

  • Без данок: 0ден.

0 мислења / Напиши мислење

Ознаки: 3D Printer